Range from 1.0 ~ 6 mm hole diameter

600mm maximum drilling depth, 500×800mm the table size, 2 tons of workbench bearing,4 tons of machine weight, 21 kw machine total power,Cutting fuel tank pressureof 10Mpa,18 mm workbench T slot, 4000*2600*2200mm size of machine tools.

Technical parameters

Borehole diameter range：φ1～φ6mm
Maximum drilling depth：600mm
Table size：500 * 800mm
Table bearing：2 tons
Weight of machine tool：4 tons
Dimension of machine tool：4000 * 2300 * 2000mm
Three axis stroke：Table 650mm X   Column 500mm Y   Feed 650mm Z
Spindle speed range (stepless)：0 ~ 15000r/min
Tool feed speed range (stepless)：0 ~ 200mm/min (non limiting parameters)
Fast moving speed：5000mm/min
Electric spindle power：2.4KW
Three axis servo motor power： X:1KW  Y:1KW  Z:1KW
Oil Pump Output：7.5KW
Chip removal machine power：0.2KW
The temperature control system of power：3P
Total power of machine tool：21KW
Cutting oil pressure：10Mpa
Spindle axis：1 axis
Aperture accuracy：IT8 ~ IT11
Surface roughness of holes：Ra ≤3.2μm
Hole axis deviation of the reference：1/1000 (S45#, φ3mm)
Filtering accuracy：20μm
Table T type slot：18mm
Damping support frame:2